1 - Selection of the logs of eucalyptus cut between September and February and cut them to length in order to seize the timber.

2 - Process of sawdust.

The radial cutting is the cutting process of obtaining a timber that provides superior quality with regard to the conduct of it, including contraction, cracks, curved.

Consequently gives more stability, came right, more uniformity of tone, more wear resistance.

For wood cutting radius there are several different ways to saw the logs, because although this process ensures better quality of wood, however the yield is lower, so it is essential that an objective set of outcome that is sought.

In theory the ideal outcome would be to cut longitudinal in order to always pass through the log and to coincide with the cracks that the natural wood shows, but this way the boards would be in the form of a wedge, the aim will be to get to closer possible.

The definition for secondary wood cutting boards radial is one whose views from top, the present plan of the face in relation to the growth of tree rings from an angle between 90 degrees, up to 60 degrees, the tolerable limit of 45 degrees.

Our timber is processed so as to satisfy the principle stated and for work requiring high quality delivered with the utmost rigor and classify such quality as extra madeidura selection.

You can very clearly this way and make sure something that is fundamental and decisive with regard to the quality of wood.

In the boards aligned or not aligned with one side, the recognition can be done by gap. Less descent, more radial. When you see only the surface of the wood, we came by. Veins closer to each other more rights and identifies the superior quality. It's a kind of genetic code.

Finally, literally, the wood with these characteristics is brilliant. Go see.

Specifically deal with this kind of process the wood (saw) in perspective and with a view to achieving the best quality objective, avoiding mention aspects of subjective expression of tastes and preferences, because although we have our wood of choice - the eucalyptus, the principle applies to all species of wood.

3 - drying process.

The drying process is natural, at altitude in a ventilated location with maritime influence of humidity - the piles of wood are trained according to the dominant climate factors that influence the quality and length of drying and optimize the stabilization of boards.

After the wood has released between 70-80% of relative humidity, said the boards of widths of reference and do the grading. It is stacked again, it is correcting any defects and after at least one more cycle winter / summer, depending on thickness, the process is completed. The moisture content should range between 16-18%.

(wood floor, especially radiant, it is appropriate to lower the moisture content to ~ 10% in artificial drying.)

This text was translated automatically using automatic translation tools.
It may contain misspellings and errors in interpretation.
We apologize for any inconvenience.